SC248 – Loose Alternator Battery Nut – 2023 Kia Sportage

August 29, 2022 NHTSA CAMPAIGN NUMBER: 22V651000

Loose Alternator Battery Nut

An engine stall increases the risk of a crash, and an electrical surge increases the risk of a fire.

 

NHTSA Campaign Number: 22V651

Manufacturer KiaeBay logo America, Inc.

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 19,701

 

Summary

KiaeBay logo America, Inc. (KiaeBay logo) is recalling certain 2023 Sportage vehicles. The alternator battery positive terminal nut may loosen, which can result in an engine stall or an electrical surge.

 

Remedy

Dealers will inspect and tighten the alternator battery positive terminal nut, as necessary, free of charge. Owner notification letters were mailed September 23, 2022. Owners may contact KiaeBay logo customer service at 1-800-333-4542. KiaeBay logo’s number for this recall is SC248.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 

Check if your Kia has a Recall

 


SC248
September 2022

ALTERNATOR B+ TERMINAL NUT INSPECTION AND TIGHTENING (SC248)

This bulletin provides information to inspect and, if necessary, tighten the alternator battery positive (B+) terminal nut on certain 2023MY KiaeBay logo Sportage (NQ5a) vehicles equipped with 2.5L Theta III engine, produced from January 12, 2022 through August 8, 2022. The alternator B+ terminal nut ensures that the electrical connection is maintained between the battery wire harness terminal plate and the alternator B+ terminal. The alternator B+ terminal nut in the affected vehicles may not have been properly tightened during the assembly. If the terminal nut is not properly tightened, it can loosen over time and may result in an engine stall while driving or a fire may occur while driving due to electrical arcing at the B+ terminal. An engine stall increases the risk of a crash, and a fire increases the risk of injury. Follow the procedure outlined in this publication to inspect and, if necessary, tighten the alternator nut to specifications. Before conducting the procedure, verify that the vehicle is included in the list of affected VINs.

NOTICE

There is no charge to the vehicle owner for this repair. Under applicable law, you may not sell or otherwise deliver any affected vehicle until it has been repaired pursuant to the procedures set forth in this bulletin.

 

Inspection Procedure:

1. Open the hood.

2. Disconnect the negative (-) terminal from the battery.

IMPORTANT

KiaeBay logo Signature Bold, 10, Justified Text box border: 1.00 pt.

3. Locate the alternator (B) and pull down on the alternator “B+” terminal nut/cable cover (C).

4. Confirm the alternator B+ terminal cable (D) is secured tight by attempting to move the terminal cable end (push/pull – left to right).

5a. If the cable (D) was secured tight, then confirm that the alternator B+ terminal nut (E) is torqued to specification.

  • If the nut was found to be torqued to specification, then classify this condition as a Pass (OK).
  • If the nut was found NOT torqued to specification, then classify this condition as a Fail (NG).

5b. If the cable (D) was loose, then torque the alternator B+ terminal nut (E) to specification.
Confirm cable is secured (push/pull–left to right) and classify this condition as a Fail (NG).

Tightening torque for Alternator B+ Nut:
13.7 – 18.1 lb.ft (18.6 – 24.5 N.m)

6. Restore Alternator B+ terminal/nut cover and re-connect the battery negative (-) terminal. Confirm normal vehicle operation.

 

AFFECTED VEHICLE RANGE:

ModelProduction Date Range
Sportage (NQ5a)January 12, 2022 to August 8, 2022

 


2023 MY SPORTAGE VEHICLES – ALTERNATOR BATTERY POSITIVE TERMINAL
SAFETY RECALL CAMPAIGN (SC248)
Q & A
September 20, 2022

Q1. What type of campaign is KiaeBay logo conducting?

A1. KiaeBay logo America, Inc., pursuant to the National Traffic and Motor Vehicle Safety Act, is conducting a Safety Recall Campaign to inspect and, if necessary, properly tighten the Alternator battery positive (B+) terminal nut.

 

Q2. What vehicles are affected by the recall?

A2. Certain 2023 model year Sportage vehicles manufactured from January 12, 2022 through August 8, 2022.

 

Q3. How many customer vehicles are affected by this recall?

A3. Approximately 19,701 vehicles

 

Q4. What is the concern with the Alternator B+ Terminal Nut?

A4. The alternator battery positive (B+) terminal nut ensures that the electrical connection is maintained between the battery wire harness terminal plate and the alternator B+ terminal. The B+ terminal nut may not have been properly tightened by the supplier during assembly. If the terminal nut is not properly tightened, it can loosen over time and may result in an engine stall while driving. In the worst case, a fire a may occur while driving due to electrical arcing at the B+ terminal. A vehicle stall increases the risk of a crash, and a fire increases the risk of injury.

 

Q5. Can you describe the recall campaign and fix?

A5. Dealers will be instructed to inspect, and if necessary, properly tighten the alternator B+ terminal nut.

 

Q6. How will owners of the affected vehicles be notified?

A6. KiaeBay logo will send a letter notifying owners of the affected vehicles by first class mail beginning on September 23, 2022.

 

Q7. What should vehicle owners do when they receive the notification?

A7. Upon receipt of the letter, owners are to contact their authorized KiaeBay logo dealer to arrange to have the recall performed on their vehicle.

 

Q8. Where were these vehicles produced?

A8. The affected Sportage vehicles were produced at a KiaeBay logo assembly plant in the U.S.

 

Q9. Will this cost vehicle owners any money?

A9. No. KiaeBay logo will perform the recall repair at no cost to the customer.

 

Q10. What about customers who may have already paid to have this situation corrected?

A10. If the customer has incurred expense to remedy this issue prior to the date of this notice, the customer may have the opportunity to obtain reimbursement for that expense. Customers may submit their receipts online to KiaeBay logo via the Owners section (Contact KiaeBay logo) of www.kia.com OR mail their documentation with the completed Request for Reimbursement Form included with this letter directly to KiaeBay logo for review and consideration at the following address:

KiaeBay logo Customer Care Center
KiaeBay logo America, Inc.
P.O. Box 52410
Irvine, CA 92619-2410
1-800-333-4542

 

A11. Are there any restrictions on an owner’s eligibility?

A11. No.

 

Q12. If a customer has an immediate question, where can they get further information?

A12. The customer can contact their local authorized KiaeBay logo dealership or call KiaeBay logo’s Customer Care Center at 1-800-333-4KIA (4542), Monday through Friday, 5 AM to 6 PM Pacific Time, or via the internet at www.kia.com (Owner’s Section).

 


2023MY Sportage
Alternator Battery Positive Terminal
Basis of Safety Defect Determination 573.6(c)(6)

 

May 11, 2022

KiaeBay logo North America (KiaeBay logo NA) and KiaeBay logo Georgia receive Techline case from dealer identifying customer complaint of no start condition involving a 2023MY KiaeBay logo Sportage. Dealer identifies loose alternator cable and thermal damage to alternator, wire harness and intake manifold. Vehicle repaired by dealer. KiaeBay logo NA Safety Office requests incident parts to be collected for further evaluation.

 

May 23-27, 2022

KiaeBay logo Georgia meets with supplier to review incident details. Supplier subsequently implements improved alternator nut visual inspection process during production.

 

June 15, 2022

Supplier implements additional end of line production torque confirmation process to ensure alternator battery positive (B+) terminal nut is properly torqued.

 

June 22, 2022

KiaeBay logo NA Safety Office receives alternator and wire harness associated with the incident and identifies thermal damage to alternator B+ terminal bolt post and nut indicating electrical arcing. KiaeBay logo NA Safety Office continues to monitor issue.

 

July 18, 2022

KiaeBay logo NA receives second Techline case from dealer identifying customer complaint of “vehicle losing power” and “shut off and would not restart” involving a 2023MY KiaeBay logo Sportage.  Dealer identifies melting of the alternator B+ terminal and nut. Vehicle repaired by dealer. KiaeBay logo NA Safety Office requests incident parts to be collected for further evaluation.

 

August 12-15, 2002Kia NA Safety Office meets with KiaeBay logo Georgia to discuss findings of second incident and supplier’s production changes.August 17, 2022

KiaeBay logo NA Safety Office receives alternator collected from second incident vehicle and identifies localized melting around broken alternator battery positive (B+) terminal due to electrical arcing. Parts from both incidents shipped to KiaeBay logo Georgia for further examination.

 

August 20-21, 2022

KiaeBay logo NA Safety Office receives and reviews 2023MY Sportage production records from KiaeBay logo Georgia.

 

August 22, 2022

KiaeBay logo NA decides to recall certain 2023MY Sportage manufactured at KiaeBay logo Georgia. Two (2) fires (1 with melting at the B+ terminal and 1 with localized damage around the alternator; both repairable by dealer). No fatalities, injuries or crashes.

 


1 Affected Product

Vehicle

MAKEMODELYEAR
KIAeBay logoSPORTAGE2023

 


11 Associated Documents

Defect Notice 573 Report

RCLRPT-22V651-1626.PDF 213.786KB

 


2023MY Sportage Alternator B+ Terminal Chronology

RMISC-22V651-6550.pdf 82.169KB

 


Recall Acknowledgement

RCAK-22V651-2089.pdf 645.168KB

 


Remedy Instructions and TSB

RCRIT-22V651-3583.pdf 405.582KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V651-3564.pdf 86.266KB

 


Manufacturer Notices(to Dealers,etc)

RCMN-22V651-3644.pdf 110.163KB

 


2023 MY SPORTAGE VEHICLES – ALTERNATOR BATTERY POSITIVE TERMINAL SAFETY RECALL CAMPAIGN (SC248) Q & A September 20, 2022

RMISC-22V651-8944.pdf 115.097KB

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V651-5919.pdf 244.046KB

 


Recall Quarterly Report #1, 2022-3

RCLQRT-22V651-3164.PDF 211.132KB

 


Recall Quarterly Report #2, 2022-4

RCLQRT-22V651-4970.PDF 211.242KB

 


Recall Quarterly Report #3, 2023-1

RCLQRT-22V651-0246.PDF 211.324KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V651&docType=RCL

 


 

SaleBestseller No. 1
ANCEL BA101 Car Battery Tester, 12V Digital Automotive Alternator Meter Diagnostic Tool,100-2000 CCA Load Capacity, Charging & Cranking Analyzer for Truck, Boat, RV, Marine Vehicle, and More
  • Catch Battery Problems Early: Featured in two videos by Project Farm, a popular YouTube channel with millions of subscribers, the ANCEL BA101 helps you quickly spot battery issues before they leave you stranded. It provides easy-to-understand readings for State of Health (SOH), State of Charge (SOC), voltage, current, CCA, plus cranking and charging system tests, so you can better understand your battery and help avoid unexpected breakdowns
  • Know the Real Condition: Don’t let inaccurate readings lead to costly surprises. Built with high-quality copper crocodile clips and a precision smart chip, this battery tester is designed to deliver dependable results. For the most accurate test, enter the correct battery type, rating value (such as CCA/Ah), and temperature exactly as shown on your battery label, so you get a clearer picture of your battery’s true condition
  • Fast, Clear, Hassle-Free Testing: The classic black-and-white screen, adjustable contrast, and white backlight make results easy to read in bright sunlight or low-light conditions. One-handed operation keeps testing simple, while direct power from your vehicle’s battery means no charging and no internal batteries to deal with. Multi-language support makes it easier for more users to test with confidence
  • Protection When Mistakes Happen: Built-in 4-in-1 protection helps guard against reverse polarity, short circuits, overcurrent, and overvoltage for safer testing, especially in tight spaces where clamp slips or wiring mistakes can happen. The 3x reinforced ABS housing adds extra durability and helps protect both the tester and your battery during everyday use
  • Built for More 12V Batteries: Supporting global standards including JIS, EN, DIN, SAE, BCI, GB, CA, MCA, and IEC, this tester works with 12V batteries used in cars, trucks, boats, RVs, ATVs, lawnmowers, golf carts, and motorbikes over 30Ah. Compatible with Flooded, AGM, GEL, and EFB batteries. Not for lithium batteries, non-12V batteries (6V/8V/24V), or motorcycles below 30Ah. For 6V testing, choose BA101 Plus. For 24V testing, choose BA101 PRO
SaleBestseller No. 2
MOTOPOWER MP0514A 12V Digital Car Battery Tester Voltmeter and Charging System Analyzer with LCD Display and LED Indication - Black Rubber Paint
  • Effortless Operation - Boasting a “plug-and-test” design, there's no need for complex set-up procedures. Just connect it to the battery following simple steps. Without starting the vehicle, you can read the battery status, and after starting, quickly obtain the alternator status. Whether you're a professional mechanic or an ordinary car owner, you can easily use it to quickly determine if the battery needs jump - starting, replacement, or if the alternator output is normal.
  • Reliable Safety Features - Equipped with reverse connection protection and over-voltage protection functions. Even if you accidentally connect the positive and negative poles wrongly or encounter excessive voltage, it can effectively safeguard the tester and the vehicle's circuit, greatly reducing the risks caused by operational errors and making users feel more at ease.
  • Precise Testing Results - Fitted with a 4-digit digital LCD display, it offers voltage testing accuracy up to 0.01 volts, providing accurate voltage readings. Additionally, it comes with 8 colored LED indicators that intuitively show the status of the battery or the alternator. The dual-indication design makes test results clear and easy to understand, offering a precise basis for judging the conditions of the battery and charging system.
  • Wide Compatibility - The testing voltage range spans from 4 to 20V DC, suitable for detecting the voltage of 12V car batteries and various other devices. The 50cm long extension cable, combined with 30A alligator clips, enables convenient and flexible connections, adapting to different testing scenarios.
  • Durable and Comfortable Design - The surface of the device is treated with black rubber paint, offering a comfortable hand-feel and a stable grip that's not easy to slip. Its compact design and light weight of only 150 grams make it easy to carry and store. Whether placed in the car for emergencies or in a professional toolbox, it takes up little space and ensures long-term reliability.
SaleBestseller No. 3
TOPDON BT100 Car Battery Tester 12V Load Tester, 100-2000 CCA Automotive Alternator Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Car Truck Motorcycle ATV SUV Boat Yacht
  • [Car Battery Tester] You can easily test and inspect your 12V lead-acid battery with this TOPDON car battery tester. The SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and numerous other understandable analytical data are provided by this battery tester. It is compatible with 100-2000CCA regular flooded, AGM flat plate/spiral, EFB, and GEL for their optimum performance.
  • [Wide Application] This 12V battery load tester can only be powered on once it is properly attached thanks to a safe passive testing approach. You may test the batteries of a number of vehicles, including cars, motorbikes, trucks, RVs, ATVs, SUVs, boats, yachts, lawnmowers, and even golf carts, without needing to charge the device first.
  • [3 Testing Function] A battery health test will determine whether or not the battery is in excellent operating order. A cranking test will determine whether or not the electrical system has sufficient power to start the engine. Check to see that the charging current, rectifier diode, and generator are all functioning normally. This handy auto battery analyzer makes sure your summer road trips won’t end on a flat.
  • [Ergonomic Features] To help you rapidly determine the health of the battery, this load battery tester is built with three different colors of LEDs. It's easy to use because it operates through a menu system. Additionally, for a reliable and secure connection during the testing process, premium-quality copper clamps have polarity reverse prevention and spark proof features.
  • [Great Choice] The TOPDON BT100 is small and compact, making it simple to keep in a glove box or center console. This battery load tester's rapid and precise results will enable you to decide whether your car battery needs to be replaced or jump-started making it an excellent choice for auto shops, garages, and DIY users who frequently check batteries.
Bestseller No. 4
KONNWEI KW208 12V Car Battery Tester, Battery Load Tester Automotive 12V Alternator Starter Tester Digital Auto Battery Analyzer Charging Cranking System Tester for Car Truck Marine Motorcycle Boat
  • 【Reliable Automotive Car Battery Tester】 KW208 is the most cost-effective battery load tester compared to other brands, it has all the functions you need and the lowest cost that you can afford. KW208 can test all 12V batteries(100-2000CCA) including regular flooded, AGM flat plate, AGM spiral or gel batteries. Provide overall analysis of batteries’ condition and help you know their status in advance before it dies. KW208 battery analyzer supports cranking and charging system tests also alternator and starter test. Conveniently store this car battery tester for batteries in your glove box or garage, ready for use whenever needed.
  • 【Galvanized Alloy Battery Clips】This battery tester has updated it's clips since 2025, thanks for the galvanized alloy battery clips, it's more durable also bring lager contact when connected with battery, it greatly improved the testing accuracy(99.7%) also safer with fully wrapped material. KW208 12V battery load tester gives you reliable and overall battery parameters such as voltage, internal resistance, cold cranking amp and AH capacity, battery health and charge status. Additionally, battery cca tester will also show you professional advice whether to replace or recharge the battery. NEW REPLACEMENT AVAILABLE FOR ANY QUALITY ISSUE.
  • 【 >99.7% High Accuracy】Thanks to KW208 meter‘s powerful and smart AI chip, it provides more than 99.7% precise testing results within milliseconds, greatly improving the testing speed and testing accuracy compared to other battery testers. Besides KW208 is the only battery tester that has over 7000+ rating and is the most reliable and popular car battery tester on Amazon.
  • 【Plug and Play】 KW208 12 volt battery load tester and analyzer allows you to test batteries both in-vehicle and out-of-vehicle, and even test dead batteries. Just connect the tester’s clips with battery then it will turn on and be ready to test and analyze battery. It’s that easy! Definitely KW208 is your best choice for there is no need to spend more expensive cost to purchase battery testers as their functions are the same.
  • Starter& Alternator Tester】KW208 not only a great car battery load tester that tests batteries cranking & charging system but also can test alternator's charging and starter's cranking conditions. And it can also switch up to 8 languages for different needs.
SaleBestseller No. 5
Battery Load Tester 12v Automotive, 20-2000 CCA Car Battery Tester and Alternator Tester for 24V Vehicles, BT300
  • Universal Battery Tester 12V / 24V: TopDiag BT300 battery load tester is able to detect the faults of car starting system and charging system, perform quick test and standard test, can test all automotive starter batteries, such as ordinary lead-acid batteries, AGM flat batteries. AGM spiral batteries and gel batteries. BT300 car battery checker can test most of the current battery standards, include: CCA, JIS, GB, SAE, MCA, CA, DIN, IEC, EN, BCI, etc. Notice: It's not compatible with 6V batteries and is not suitable for use with lithium batteries.
  • Accurate Battery & Alternator Diagnosis: Equipped with intelligent chips, TopDiag 12v battery tester BT300 delivers reliable results for battery health (SOH), charge status (SOC), CCA, and impedance. No more guesswork—select the correct battery type/CCA value, and get precise data in 10 seconds (Note: input correct AH value for quick test, or use standard test for no manual input).
  • Cranking Test & Charging Test: TopDiag BT300 automotive battery tester allows to check the conditions of starting system and charging test, so you can view the current battery start test results and battery status and make sure that your car is in good running condition at all times. Support software updates via USB (download from PC)—always get the latest features for better compatibility.
  • Wide Compatibility for All 12V/24V Vehicles: TopDiag BT300 auto battery tester can be widely use for all 12V/24V vehicle battery system diagnostics, including but not limited to cars, trucks, buses, diesel vehicles, motorcycles, boats, RVs, beach carts and more.
  • Multiple Languages & Software Update Mode: TopDiag BT300 battery testers support up to 7 languages: English, Spanish, German, French, Italian, Portuguese, Polish, etc. Topdiag BT300 battery analyzer also supports software update, ensure you always access to the latest features.

Last update on 2026-06-19 / Affiliate links / Images from Amazon Product Advertising API


 

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...