November 19, 2021 NHTSA CAMPAIGN NUMBER: 21V908000
Passenger-Side Sliding Door May Not Latch
A power sliding door that fails to latch may open while moving, increasing the risk of injury.
NHTSA Campaign Number: 21V908
Manufacturer Kia
Motors America
Components STRUCTURE, LATCHES/LOCKS/LINKAGES
Potential Number of Units Affected 2,956
Summary
Kia
Motors America (Kia
) is recalling certain 2022 Carnival vehicles. The remote controller assembly for the passenger-side power sliding door may malfunction, preventing the passenger-side sliding door from securely latching.
Remedy
Dealers will replace the passenger-side power sliding door release actuator’s drum and holder inside the remote controller assembly, free of charge. Owner notification letters were mailed December 16, 2021. Owners may contact Kia
customer service at 1-800-333-4542. Kia
’s number for this recall is SC221.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Kia has a Recall
| GROUP | MODEL | |
| Safety Recall Campaign | 2022MY
Carnival (KA4) | |
| NUMBER | DATE | |
| SC221 | December 2021 | |
| SAFETY RECALL CAMPAIGN | ||
| SUBJECT:
RELEASE ACTUATOR REPAIR FOR PASSENGER-SIDE POWER SLIDING DOOR (SC221) | ||
This bulletin provides information to repair the passenger-side (RH) power sliding door on certain 2022MY Carnival (KA4) vehicles produced from July 28, 2021 through October 14, 2021. Certain plastic holders inside the release actuator within the passenger-side power sliding door remote controller assembly may have been manufactured out of specification. As a result, binding between the drum and holder can cause the latch to intermittently stick in the open position. If the latch becomes stuck in the open position, the passenger side power sliding door will not latch and the door can open while driving, increasing the risk of injury. Follow the procedure outlined in this publication to replace the passenger-side power sliding door release actuator’s drum and holder with new ones as a pair in the remote controller assembly. Before conducting the procedure, verify that the vehicle is included in the list of affected VINs.
NOTICE
There is no charge to the vehicle owner for this repair. Under applicable law, you may not sell or otherwise deliver any affected vehicle until it has been repaired pursuant to the procedures set forth in this bulletin.
NOTICE
To assure complete customer satisfaction, always remember to refer to WebDCS Warranty Coverage (validation) Inquiry Screen (Service → Warranty Coverage → Warranty Coverage Inquiry) for a list of any additional campaigns that may need to be performed on the vehicle before returning it to the customer.
Release Actuator Repair Procedure:
1. Remove the rear door remote controller assembly (A) by referring to the “Body Electrical System → Power Sliding Door System → Rear Door Remote Controller → Repair procedures” chapter in the applicable Shop Manual on KGIS.
2. Remove the five (5) screws (B) to detach the rear door remote controller cover and cable.
3. Remove the connector (C) and detaching hooks (D) from the cover, then turn the cover counterclockwise.
CAUTION
Be careful not to damage the cover.
4. Remove the seven (7) actuator screws to remove the cover.
- E: Three (3) 20mm screws (painted yellow for illustration purpose only).
- F: Four (4) 14mm screws.
5. Remove the middle gear (G) and replace it with the new drum and holder gear (H).
6. Securely reinstall the release actuator (I) in place.
7. Reassemble all removed parts in the reverse order of removal.
Note: Replace the 13 door trim fasteners (J) with the new parts from the kit when reattaching the door trim.
- Fastener (white): Qty 10
- Fastener (green): Qty 3
AFFECTED VEHICLE RANGE:
| Model | Production Date Range |
| Carnival (KA4) | July 28, 2021 to October 14, 2021 |
REQUIRED PART:
| Part Name | Kit Part Number | Figure | Qty. | Kit Contents |
| Drum and Holder Fastener Kit | 81452 R0100QQK | 1 Kit | • Drum & Holder: Qty 1 (note identification marks on new part) | |
| • Fastener (white): Qty 10 | ||||
| • Fastener (green): Qty 3 |
SC221 – 2022 MY CARNIVAL PASSENGER-SIDE POWER SLIDING DOOR
SAFETY RECALL CAMPAIGN
Q & A
December 9, 2021
Q1. What type of campaign is Kia
conducting?
Kia
America, Inc., pursuant to the National Traffic and Motor Vehicle Safety Act, is conducting a Safety Recall Campaign to replace the power sliding door release actuator and drum holder as a pair in the remote controller assembly on certain 2022 MY Carnival vehicles.
Q2. What vehicles are affected by the recall?
Certain 2022 MY Kia
Carnival vehicles manufactured from July 28, 2021 through October 14, 2021.
Q3. How many vehicles are affected by this recall?
Approximately 2,956 vehicles are affected by this recall.
Q4. What is the concern with the power sliding door?
Certain plastic holders inside the release actuator within the passenger-side power sliding door remote controller assembly may have been manufactured out of specification by the supplier. As a result, binding between the drum and holder can cause the latch to intermittently stick in the open position. If the latch becomes stuck in the open position, the passenger-side power sliding door will not latch and the door can open while driving, increasing the risk of injury.
Q5. Can you describe the recall campaign and fix?
Kia
dealers will replace the passenger-side power sliding door release actuator’s drum and holder with new ones.
Q6. How will owners of the affected vehicles be notified?
Kia
will notify owners of the affected vehicles by first class mail beginning on December 16, 2021.
Q7. What should vehicle owners do when they receive the notification?
Upon receipt of the notification letter, owners are to contact their authorized Kia
dealer to arrange to have their vehicle inspected and repaired. If owners encounter this condition, they should stop the vehicle immediately and press the POWER DOOR OFF button so it is illuminated. Then, they need to close the passenger-side sliding door manually (they may need to try multiple times). When the door is properly closed, the door ajar warning will no longer be displayed in the cluster
Q8. How does the vehicle owner know if the recall condition may be occurring in their vehicle?
If the passenger-side power sliding door does not latch properly, four (4) audible alert chimes and illumination of the door-ajar warning on the instrument cluster will occur even when the vehicle is stationary. If the warnings are ignored and the vehicle is driven in this condition at speeds higher than approximately 6 mph, an additional continuous audible door-ajar ringing sound will occur, and the door-ajar warning will remain illuminated with an additional flashing red graphic.
Q9. How was the issue discovered?
Through the regular monitoring of field information.
Q10. Will this cost vehicle owners any money?
No. Kia
will perform the recall inspection and repair at no cost to the customer.
Q11. What about customers who may have already paid to have this situation corrected?
If the customer has incurred expense to remedy this issue prior to the date of this notice, the customer may have the opportunity to obtain reimbursement for that expense. Customers may submit their receipts online to Kia
via the Owners section (Contact Kia
) of www.kia.com OR mail their documentation with the completed Request for Reimbursement Form included with this letter directly to Kia
for review and consideration at the following address:
Consumer Assistance Center
Kia
America, Inc.
P.O. Box 52410
Irvine, CA 92619-2410
1-800-333-4542
Q12. How long will the repair take?
The actual time required to perform the repair will be approximately two (2) to three (3) hours. However, the vehicle may be needed longer. It is recommended that owners schedule a service appointment to minimize inconvenience. Owners can also contact their authorized Kia
dealer for an exact estimate of how long they may need the vehicle. (Most Kia
dealers have online appointment scheduling via their dealership websites to maximize convenience.)
A13. Are there any restrictions on an owner’s eligibility?
No.
Q14. If a customer has an immediate question, where can they get further information?
The customer can contact their local authorized Kia
dealership or call Kia
’s Consumer Assistance Center at 1-800333-4KIA (4542), Monday through Friday, 5 AM to 6 PM Pacific Time, or via the internet at www.kia.com (Owner’s Section).
2022MY Carnival
Passenger Side Power Sliding Door
Basis of Safety Recall Determination 573.6(c)(6)
November 4, 2021
Kia
Corporation (Kia
HQ) informs Kia
North America (Kia
NA) Safety Office of a potential issue with the passenger side Power Sliding Door (PSD) not closing properly based on customer complaints in the Korean market.
November 8—November 10, 2021
Kia
NA Safety Office conducts an evaluation of field data associated with PSD not latching and identifies two (2) warranty claims, two (2) customer complaints and one (1) techline case relating to three (3) unique VINs.
November 11, 2021
Kia
NA Safety Office shares its field data information with Kia
HQ and seeks further clarification as to potential cause of issue and warnings provided to the customer upon occurrence.
November 12-15, 2021
Kia
NA conducts evaluation of potential safety issue associated with the PSD opening while driving condition in light of numerous warnings provided to customer.
Kia
HQ works with supplier and identifies the plastic holder inside the release actuator was manufactured out of specification.
Kia
HQ and the supplier confirm affected vehicle scope is 7/28/21 through 10/26/21.
Kia
NA holds 2022MY Carnival vehicles produced from 10/15/21 through 10/26/21 at the port.
November 16, 2021
Kia
NA decides to conduct safety recall. No fatalities, injuries, crashes or fires. Two (2) warranty claims, two (2) customer complaints and one (1) techline case.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| KIA | CARNIVAL | 2022 |
12 Associated Documents
Manufacturer Notices(to Dealers,etc) – MY Kia
Carnival Recall Campaign Notice, Attention ALL DEALER PRINCIPALS: December 9, 2021
RCMN-21V908-2742.pdf 111.596KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V908-7696.pdf 240.153KB
Recall Acknowledgement
RCAK-21V908-3461.pdf 673.206KB
Chronology
RMISC-21V908-4174.pdf 64.412KB
Defect Notice 573 Report
RCLRPT-21V908-4735.PDF 214.255KB
Remedy Instructions and TSB
RCRIT-21V908-1279.pdf 400.789KB
SC221 2022 MY CARNIVAL PASSENGER-SIDE POWER SLIDING DOOR SAFETY RECALL CAMPAIGN Q & A: December 9, 2021
RMISC-21V908-2989.pdf 117.351KB
Manufacturer Notices(to Dealers,etc) – MY Kia
Carnival Recall Campaign Notice Attention: ALL DEALER PARTS & SERVICE MANAGERS, December 9, 2021
Recall Quarterly Report #1, 2021-4
RCLQRT-21V908-6424.PDF 211.134KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V908-6529.PDF 211.237KB
Recall Quarterly Report #3, 2022-2
RCLQRT-21V908-5152.PDF 211.329KB
Recall Quarterly Report #4, 2022-3
RCLQRT-21V908-3810.PDF 211.438KB
Latest Recalls Documents
- [Easy to Use—Work Out of the Box] + [FOXWELL 2026 New Version] FOXWELL NT604 Elite scan tool is the 2026 new version from FOXWELL, designed for car owners who want to figure out the cause of issues before fixing car problems by scanning common systems like ABS, SRS, engine, and transmission. The NT604 Elite obd2 scanner diagnostic tool comes with the latest software—no need to waste time downloading software first. Plug the scanner into the OBDII port with OBDII cable to start the diagnosis.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happens when the warning light of ABS/SRS/transmission/check engine flashes? Instead of taking your cars to dealership, this FOXWELL scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. Note:The device is a diagnostic tool, not a repair tool. To turn off a warning light, you must first physically repair the issue causing it. Only then can the scanner be used to clear the corresponding fault code.
- [5 in 1 Car Diagnostic Scanner] Compared with obd scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also serves as ABS/SRS scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance functions like reset or relearn. For the SRS system, NT604 Elite can read and clear common fault codes not caused by a crash, but crash/collision data cannot be cleared.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite ABS SRS scanner supports 60+ car brands from worldwide (America/Asia/Europe). You don’t need to pay extra software fee. AUTOVIN may not work on some older vehicles or certain vehicle brands. If AUTOVIN fails, please input the vin code manually or go to the Diagnostic Menu to select your vehicle model.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level car scanner diagnostic tool only offers plastic bag to hold the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- MAINTAIN PEAK PERFORMANCE AND SAFETY ON THE ROAD - Easily find and fix the problem with your vehicle using the INNOVA 5610 bidirectional scan tool. This OBD2 scanner diagnostic tool provides real-time solutions to troubleshoot issues. Access OBD2 and OEM live data with ease, making it an essential car scanner diagnostic tool. Perfect for those seeking reliable car diagnostic scanner and code readers & scan tools for vehicles.
- PRO-LEVEL FUNCTIONALITIES - Use the INNOVA 5610’s Enhanced Data Stream to view live data for advanced systems like ABS, SRS, transmission, and engine. The Special Reset Function lets you use dealership-level re-learn procedures. This car diagnostic scanner is ideal for those needing a bidirectional scan tool or mechanic tools automotive for professional repairs. Compatible with select vehicle makes and models; not universal.
- COMMAND WITH BIDIRECTIONAL CONTROLS - The INNOVA 5610 bidirectional scan tool sends commands to test functions such as fuel pump on/off or retracting the electronic parking brake. With this car scanner diagnostic for all cars, you can operate like a pro. Ideal for those seeking a car code reader and reset tool or advanced fixd car diagnostic tool capabilities. Compatible with select vehicle makes and models; not universal.
- EASY TO USE - The INNOVA 5610 OBD2 scanner diagnostic tool supports English, Spanish, and French. Easily use this scanner for car on most 1996 - 2023 (2024 coming soon) OBD2 vehicles to verify repairs. Designed for ease of operation, it’s a dependable code reader for cars and trucks and check engine code reader. To confirm vehicle coverage, please utilize Innova's Coverage Checker.
- BUY AND DRIVE WITH CONFIDENCE - Backed by ASE-Certified support, this car scanner pairs with the RepairSolutions2 app, trusted by 4M users, for wireless OBD scanner functionality. With free updates and no subscription fees, this durable car computer diagnostic reader ensures you’re prepared for any repair. A must-have diagnostic scanner for vehicles.
- 【Full Systems Automotive Diagnostic】 More than checking engine, ABS and SRS, OBDMATE OM970 obd2 scanner performs comprehensive diagnostics on all electric modules. It quickly scans and clears fault codes, turns off warning lights, reads live data, and features Auto-VIN technology.
- 【Live Datastream&4-in-1 Graph】 Easily view live sensor data such as RPM, fuel trims, ATF temperature, wheel speed sensor, battery voltage and so on. OM970 scan tool also supports 4-in-1 trend graphing. Spend just 3 minutes to check – and you'll know exactly what's going wrong, helping you avoid hundreds in dealership diagnostic fees.
- 【One-Click I/M Readiness&Full OBD2 Functions】 Press F1 to get an intuitive corloured form about whether your vehicle's emissions-related systems are operating properly. Help you get smog-check ready quickly. OM970 obd2 diagnostic tool supports all essential OBD2 functions you need. Plus, it features battery voltage test and DLC 16-PIN test.
- 【Straightforward Menus with Easy Navigation】 All functions are easy to understand without obscure decriptions. 3.5" Large screen delivers clear readings while keeping one-hand operation. The car diagnostic tool comes with a silicone protective case and a hard-shell carrying case, ensuring long-lived durability and drop resistance.
- 【Budget-Friendly, No Subscriptions, Free Software Updates】 Plug and play: no bluetooth pairing, monthly fees, Wi-Fi connection, or any other troublesome initial settings. OM970 obd2 scanner works out of the box with the latest software. Lifetime free upgrade.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Wide Vehicle Coverage] ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide. Supports cutting-edge CAN FD protocols, making it compatible with modern vehicles including 2020+ GM & Chrysler. It supports FCA AutoAuth (official Secure Gateway access) to stay up to date with newer models from Chrysler, Jeep, Fiat, and others. Plus, it's fully compatible with Android 11 for smoother use.
- [All System Diagnostics, Professional-Level Scanner] - BLCKTEC 460T is the ultimate OBD2 diagnostic tool for home mechanics and professionals. It supports all 10 OBD2 modes, reads and clears Engine/Transmission/ABS/SRS codes, performs All-System Diagnostics, offers workshop reset tools, and provides real-time live data. It helps you pinpoint issues, assess your car's condition, and prepare for SMOG checks with ease. NOTE: Function availability depends on your vehicle. Before you buy, be sure to use the Compatibility Checker on BLCKTEC website or contact our customer support to verify that the features you need are supported for your vehicle’s specific year, make, and model.
- [12+ Most Popular Reset Functions] - BLCKTEC 460T OBD2 scanner offers 12+ dealer-level service functions, including Oil Maintenance Reset, ABS Bleeding, EPB Reset, SAS(Steering Angle Sensor) Recalibration, DPF(Diesel Particulate Filter) Reset, Throttle Body Relearn, Battery Reset/Initialization, TPMS Relearn, Transmission Reset, Fluid Change Reset, Maintenance Reset and more, enabling you to perform workshop services like a pro. NOTE: Function availability depends on your vehicle. Be sure to use the Compatibility Checker on BLCKTEC website to verify that the features you need are supported for your vehicle.
- [Real-Time OBD2 and OEM Live Data, Freeze Frame Data] - BLCKTEC 460T helps diagnose vehicle issues when warning lights like Check Engine Light or ABS/SRS Light appear. It offers detailed DTC info, ECU Freeze Frame Data, and real-time OBD2 and advanced OEM live data, including Engine, Transmission, ABS, SRS, and more, making it easy to diagnose and resolve vehicle problems. You can view, graph, record, replay, and overlay up to four live data streams in a single graph for better analysis.
- [AutoVIN, AutoReLink, AutoScan, 3X Faster] - Equipped with AutoVIN technology, 460T automatically retrieves the VIN to save you time. Its AutoScan and AutoReLink features scan all of the vehicle's ECUs and detect any fault codes immediately after you plug the scanner into the vehicle's OBD2 port - no button presses required. Additionally, it regathers DTC and I/M readiness information every 30 seconds, simplifying monitor tests. 460T's advanced technology makes it 3X faster than other products.
- [Get RepairSolutions2, the #1 Auto Repair App for Free] - When paired with RepairSolutions2(RS2) App, 460T becomes even more powerful. RS2's Verified Fix Database built by master technicians, provides the parts needed for the repair. Additionally, RS2 gives you access to OEM warranty info, maintenance schedules, TSB, and dealership recall info, making car care easier than ever. RS2 is free with no subscription fees and it stores your car scan reports in the cloud, allowing you to access, share, or print them anytime and anywhere.
SEOCONTENT-START
A printed copy is for reference only; publication information can be updated at any time. Always refer to KGIS for the latest information. After logging in kdealer.com, the newest technical publications are listed in ‘Service Releases’ and has the latest service information that has been released. GROUP MODEL Safety Recall Campaign 2022MY Carnival (KA4) NUMBER DATE SC221 December 2021 SAFETY RECALL CAMPAIGN RELEASE ACTUATOR REPAIR FOR PASSENGER-SIDE POWER SLIDING DOOR (SC221) This bulletin provides information to repair the passenger-side (RH) power sliding door on certain 2022MY Carnival (KA4) vehicles produced from July 28, 2021 through October 14, 2021. Certain plastic holders inside the release actuator within the passenger-side power sliding door remote controller assembly may have been manufactured out of specification. As a result, binding between the drum and holder can cause the latch to intermittently stick in the open position. If the latch becomes stuck in the open position, the passenger side power sliding door will not latch and the door can open while driving, increasing the risk of injury. Follow the procedure outlined in this publication to replace the passenger-side power sliding door release actuator’s drum and holder with new ones as a pair in the remote controller assembly. Before conducting the procedure, verify that the vehicle is included in the list of affected VINs. SUBJECT: To assure complete customer satisfaction, always remember to refer to WebDCS Warranty Coverage (validation) Inquiry Screen (Service → Warranty Coverage → Warranty Coverage Inquiry) for a list of any additional campaigns that may need to be performed on the vehicle before returning it to the customer. NOTICE There is no charge to the vehicle owner for this repair. Under applicable law, you may not sell or otherwise deliver any affected vehicle until it has been repaired pursuant to the procedures set forth in this bulle tin. NOTICE RH Power Sliding Door RELEASE ACTUATOR REPAIR FOR PASSENGER-SIDE POWER SLIDING DOOR (SC221) Page 2 of 5 Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information. TSB: SC221 Carnival (KA4) December 2021 SUBJECT: Release Actuator Repair Procedure: 1. Remove the rear door remote controller assembly (A) by referring to the “Body Electrical System → Power Sliding Door System → Rear Door Remote Controller → Repair procedures” chapter in the applicable Shop Manual on KGIS. 2. Remove the five (5) screws (B) to detach the rear door remote controller cover and cable. 3. Remove the connector (C) and detaching hooks (D) from the cover, then turn the cover counterclockwise. A B Be careful Be careful notnot to damage the cover.to damage the cover. CAUTIONCAUTION D D C Page 3 of 5 Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information. TSB: SC221 Carnival (KA4) December 2021 RELEASE ACTUATOR REPAIR FOR PASSENGER-SIDE POWER SLIDING DOOR (SC221) SUBJECT: 4. Remove the seven (7) actuator screws to remove the cover. • E: Three (3) 20mm screws (painted yellow for illustration purpose only). • F: Four (4) 14mm screws. 5. Remove the middle gear (G) and replace it with the new drum and holder gear (H). E F G H RELEASE ACTUATOR REPAIR FOR PASSENGER-SIDE POWER SLIDING DOOR (SC221) Page 4 of 5 Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information. TSB: SC221 Carnival (KA4) December 2021 SUBJECT: 6. Securely reinstall the release actuator (I) in place. 7. Reassemble all removed parts in the reverse order of removal. Note: Replace the 13 door trim fasteners (J) with the new parts from the kit when reattaching the door trim. • Fastener (white): Qty 10 • Fastener (green): Qty 3 I J Page 5 of 5 Printed TSB copy is for reference only; information may be updated at any time. Always refer to KGIS for the latest information. TSB: SC221 Carnival (KA4) December 2021 RELEASE ACTUATOR REPAIR FOR PASSENGER-SIDE POWER SLIDING DOOR (SC221) SUBJECT: AFFECTED VEHICLE RANGE: Model Production Date Range Carnival (KA4) July 28, 2021 to October 14, 2021 REQUIRED PART: Part Name Kit Part Number Figure Qty. Kit Contents Drum and Holder Fastener Kit 81452 R0100QQK 1 Kit • Drum & Holder: Qty 1 (note identification marks on new part) • Fastener (white): Qty 10 • Fastener (green): Qty 3 WARRANTY INFORMATION: N Code: N99 C Code: C99 When necessary, manually enter sublet code ‘X2’ for reimbursement of one roundtrip rideshare expense or up to three (3) days of rental for drum and holder replacement. Attach supporting documentation. Claim Type Causal P/N Qty. Repair Description Labor Op Code Op Time Replacement P/N Qty. R 814B2 R0100 0 (SC221) Drum & Holder Replacement for Power Sliding Door 211164R0 0.8 M/H 81452 R0100QQK 1 VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SC221 when accessing the WebDCS system. NOTICE
**************************************************************************************************************
Kia America, Inc. Corporate Headquarters 111 Peters Canyon Road, Irvine, CA 92606-1790 USA IMPORTANT SAFETY RECALL (NHTSA Recall Number: 21V908) This notice applies to your vehicle: (Insert VIN) December 16, 2021 Dear Kia Carnival Owner: Kia has identified a defect in your vehicle which relates to motor vehicle safety. This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Kia America, Inc. has decided that a defect which relates to motor vehicle safety exists in certain 2022 MY Carnival vehicles. The defect can result in the passenger-side power sliding door intermittently sticking in the open position and may cause the door to open while driving, thereby increasing the risk of injury. Our records indicate that you own or lease one of the potentially affected vehicles. What Is the Problem? Certain plastic holders inside the release actuator within the passenger-side power sliding door remote controller assembly may have been manufactured out of specification by the supplier. As a result, binding between the drum and holder can cause the latch to intermittently stick in the open position. If the latch becomes stuck in the open position, the passenger-side power sliding door will not latch and the door can open while driving, increasing the risk of injury. Kia Will Replace the Passenger-Side Power Sliding Door Release Actuator’s Drum And Holder At No Cost To You. Kia will replace the passenger-side power sliding door release actuator’s drum and holder as a pair in the remote controller assembly with new ones so that the power sliding door will latch properly. The estimated time required to perform the repair will be approximately two (2) to three (3) hours. What Should You Do? • In the interest of the safety of your passengers, as well as your own safety, please immediately contact your Kia dealer to arrange for the recall repair to be conducted. • WARNING: If the power sliding door does not latch properly, four (4) audible alert chimes and illumination of the door-ajar warning on the instrument cluster will occur even when the vehicle is stationary. If the warnings are ignored and you drive the vehicle in this condition at speeds higher than approximately 6 mph, an additional continuous audible door-ajar ringing sound will occur, and the door-ajar warning will remain illuminated with an additional flashing red graphic. • If you encounter this condition, please stop your vehicle immediately and press the POWER DOOR OFF button so it is illuminated (see Page 4-40 of your Owner’s Manual). Once POWER DOOR OFF button is illuminated, close the passenger-side sliding door manually. You may need to try to close the door multiple times until it is properly closed and the door-ajar warning is no longer displayed in the instrument cluster. • To find your nearest dealer, visit www.kia.com and click the “Find Dealer” button in the upper right corner (“Dealers” on a mobile device). You can also use the QR code below with your mobile device to access this information (see the bottom of this letter for more information about QR code use): SC221 What If You Have Already Paid To Have This Situation Corrected? If you have incurred expense to remedy this issue prior to the date of this notice, you may have the opportunity to obtain reimbursement for that expense. You may submit your receipts online to Kia via the Owners section of www.kia.com or mail your receipts with a copy of the attached Request for Reimbursement form directly to Kia for review and consideration: Consumer Assistance Center Kia America, Inc. P.O. Box 52410 Irvine, CA 92619-2410 1-800-333-4542 Pursuant to the General Reimbursement Plan issued by Kia pursuant to Federal Regulation 49 CFR 573.13, Kia will use its best efforts to respond to your claim within sixty (60) days of receipt and at that time Kia may either accept or reject that claim or it may request more information to evaluate the claim. Have You Changed Your Address Or Sold Your Kia? If you have changed your home address, sold your Kia vehicle, or no longer own your vehicle, please complete the attached prepaid “Change of Address/Ownership” card and mail it to us. You can also contact the Consumer Assistance Center phone number listed above. What If You Are A Vehicle Lessor? What If You Have Other Questions? If your dealer does not respond to your service request in a timely manner, we suggest that you call Kia’s Consumer Assistance Center at 1-800-333-4542. This number has TTY capability. If you still are not satisfied that we have remedied this situation without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590; or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. This action has been taken in the interest of your safety, and we regret any inconvenience this situation may cause you. Sincerely, Consumer Affairs Department Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. QR Code Use: • A QR Code is a square, 2-dimensional barcode that can be read by mobile devices loaded with an appropriate barcode or QR Code Reader App. The app reads the barcode image and then launches/uploads the specific information the code contains, such as URLs, text, photos, videos. • With a mobile device, download a QR Code Reader App. With many devices, you can do this through an app store or marketplace. • Open the QR Code Reader App on your mobile device. The app will utilize your device’s camera. Center the code in the camera viewing area. With some apps, the URL or other information will automatically load when the code is recognized. For others, you may have to snap or take a picture of the QR code. Refer to the QR Reader Code App instructions. REQUEST FOR REIMBURSEMENT FORM SC221 – 2022 MY CARNIVAL PASSENGER-SIDE POWER SLIDING DOOR SAFETY RECALL CAMPAIGN If you have incurred expense to remedy this issue prior to the date of this notice, you may have the opportunity to obtain reimbursement for that expense. You may submit your receipts online to Kia via the Owners section of www.kia.com (MyKia>Contact Us or directly at this link: https://ksupport.kiausa.com/ConsumerAffairs). If you do not have access to a computer or prefer to submit your request by mail, please complete this Request for Reimbursement and mail it to the following address for review and consideration, along with backup documentation: Consumer Assistance Center Kia America, Inc. P. O. Box 52410 Irvine, CA 92619-2410 1-800-333-4542 Please allow at least sixty (60) days for review and response. Customer First Name: Customer Last Name: Attach the following: o Repair Order showing: o Name & address of person paying for the repair o Vehicle Identification Number (VIN) of vehicle repaired o Description of the problem repaired Date of repair, mileage at the time of repair and total cost of claimed repair expense o Evidence of Payment of Repair showing: o Date of Payment o Amount Paid (e.g., copies of cancelled check or credit card receipt) I certify that the documents attached to this Request for Reimbursement are true and accurate and should be used as the basis for a reimbursement to me under this campaign. CLAIMANT’S SIGNATURE: Signature Print Name Customer Address: Customer City: State: Zip: Phone #: ( ) – Email: Vehicle Identification Number: Mileage at Time of Repair: Date of Repair: / / Amount of Reimbursement Requested $
**************************************************************************************************************
SC221 December 9, 2021 ATTENTION: ALL DEALER PRINCIPALS Kia America, Inc., pursuant to the National Traffic and Motor Vehicle Safety Act, is conducting a Safety Recall Campaign on certain 2022 MY Kia Carnival vehicles manufactured from July 28, 2021 through October 14, 2021. Certain plastic holders inside the release actuator within the passenger-side power sliding door remote controller assembly may have been manufactured out of specification by the supplier. As a result, binding between the drum and holder can cause the latch to intermittently stick in the open position. If the latch becomes stuck in the open position, the passenger-side power sliding door will not latch and the door can open while driving, increasing the risk of injury. Kia dealers will replace the passenger-side power sliding door release actuator’s drum and holder with new ones as a pair in the remote controller assembly. Your Service Manager was sent a copy of the owner notification letter and a Q&A guide for recall questions both of which describe the issue and information on how to access the list of affected vehicles. Kia will start notifying the vehicle owners on December 16, 2021. What Should You Do? Please make certain the appropriate personnel in your dealership are familiar with the details of this recall campaign to ensure proper responses to customer inquiries and requests to have the campaign performed on their vehicles. NHTSA ADVISORY: It is a violation of Federal law for a dealer to deliver a new motor vehicle covered by this notification under a sale or lease until the defect is remedied. LEGAL PRIVACY LIABILITY NOTICE: Pursuant to the terms of the Dealer Sales and Service Agreement and the Gramm-Leach-Bliley federal consumer privacy act, you are required to keep confidential any and all information and documents provided to you by Kia America, Inc. or generated by you in the conduct of carrying out work under that Agreement regarding Kia vehicle purchasers and owners, including but not limited to warranty claim information. Kia dealers may use such owner information for the sole purpose of conducting and performing this safety recall campaign, and for no other purpose. If you have any questions, please contact your Kia District Parts & Service Manager. Sincerely, Kia Service Department Enclosures
**************************************************************************************************************
SC221 December 9, 2021 ATTENTION: ALL DEALER PARTS & SERVICE MANAGERS Kia America, Inc., pursuant to the National Traffic and Motor Vehicle Safety Act, is conducting a Safety Recall Campaign on certain 2022 MY Kia Carnival vehicles manufactured from July 28, 2021 through October 14, 2021. Certain plastic holders inside the release actuator within the passenger-side power sliding door remote controller assembly may have been manufactured out of specification by the supplier. As a result, binding between the drum and holder can cause the latch to intermittently stick in the open position. If the latch becomes stuck in the open position, the passenger-side power sliding door will not latch and the door can open while driving, increasing the risk of injury. Kia dealers will replace the passenger-side power sliding door release actuator’s drum and holder with new ones as a pair in the remote controller assembly. PARTS INFORMATION: Due to limited supply, we’ll be auto shipping parts Kits for 100% of dealer stock on 12/9. Dealers may order additional part Kits with VIN requirement. Please schedule/plan ahead to ensure parts arrive before customer. The Technical Service Bulletin that provides vehicle inspection and repair procedures, affected VIN production range, and warranty claim information will be posted on the Kia Global Information System (KGIS) at www.kiatechinfo.com in the week of December 9, 2021. Enclosed you will find a copy of the owner notification letter and a Q&A Guide for recall questions, both of which describe the issue. A list of vehicles affected by this recall can be accessed on WEBDCS. Log onto the site, select the Campaigns Tab, click on Open Campaign Report in the left side menu, and select SC221 to generate the list. Kia will start notifying vehicle owners on December 16, 2021. Please start performing the repairs immediately on any affected vehicles currently in your inventory. Note that any vehicle owners who have already paid for Remote Controller Assembly repairs related to passenger-side power sliding door concerns can submit a request for reimbursement online via the Owner’s Section of www.kia.com. Also, please make certain the appropriate personnel in your dealership are familiar with the details of this recall to ensure proper responses to customer inquiries and requests to have the recall performed on their vehicles. This Safety Recall represents an opportunity for your service department to deliver an exceptional service experience (e.g., flexible service appointment process, car wash and vacuum and timely service). NHTSA ADVISORY: It is a violation of Federal law for a dealer to deliver a new motor vehicle covered by this notification under a sale or lease until the defect is remedied. LEGAL PRIVACY LIABILITY NOTICE: Pursuant to the terms of the Dealer Sales and Service Agreement and the Gramm-Leach-Bliley federal consumer privacy act, you are required to keep confidential any and all information and documents provided to you by Kia America, Inc. or generated by you in the conduct of carrying out work under that Agreement regarding Kia vehicle purchasers and owners, including but not limited to warranty claim information. Kia dealers may use such owner information for the sole purpose of conducting and performing this safety recall campaign, and for no other purpose. If you have any questions, please contact your Kia District Parts and Service Manager. Sincerely, Kia Service Department
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-908 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Kia Motors America Submission Date : NOV 19, 2021 NHTSA Recall No. : 21V-908 Manufacturer Recall No. : SC221 Manufacturer Information : Manufacturer Name : Kia Motors America Address : 111 Peters Canyon Road Irvine CA 92606 Company phone : 800-333-4542 Population : Number of potentially involved : 2,956 Estimated percentage with defect : 12 % Vehicle Information : Vehicle 1 : 2022-2022 Kia Carnival Vehicle Type : LIGHT VEHICLES Body Style : ALL Power Train : GAS Descriptive Information : Certain 2022 model year Carnival vehicles manufactured from 7/28/2021 through 10/14/2021. The recall population was determined by a review of vehicle production and supplier records. The vehicles subject to this recall were not produced in VIN order. Customers seeking information about their specific vehicle will be referred to Kia’s Consumer Assistance Center or their Kia dealer. Production Dates : JUL 28, 2021 – OCT 14, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Certain plastic holders inside the release actuator within the passenger side power sliding door remote controller assembly may have been manufactured out of specification by the supplier. As a result, binding between the drum and holder can cause the latch to intermittently stick in the open position. If the latch becomes stuck in the open position, the passenger side power sliding door will not latch, and the door can open while driving, increasing the risk of injury. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : An unlatched passenger side power sliding door can open while driving, Part 573 Safety Recall Report 21V-908 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of the Safety Risk : increasing the risk of injury. Description of the Cause : Out of specification plastic holder inside the release actuator. Identification of Any Warning that can Occur : Four (4) audible alert chimes and illumination of the door-ajar warning on the instrument cluster when the power sliding door does not close properly even when the vehicle is stationary. If the driver ignores the warnings and drives the vehicle in this condition at speeds higher than approximately 6 mph, an additional continuous audible door-ajar ringing sound will occur, and the doorajar warning remains illuminated with an additional flashing red graphic. Involved Components : Component Name 1 : Remote Controller Assy Component Description : Remote Controller Assy, RR Door, RH Component Part Number : 814C2-R0100 Supplier Identification : Component Manufacturer Name : Daedong Door Co. (Songdo Plant) Address : 64, Cheomdan-daero 124 beon-gil, Yeonsu-gu Incheon Foreign States 21991 Country : Korea, Republic of Chronology : See attached document titled “2022MY Carnival Passenger Side Power Sliding Door Chronology” Part 573 Safety Recall Report 21V-908 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : All owners of the subject vehicles will be notified by first class mail with instructions to bring their vehicles to a Kia dealer. Dealers will replace the passenger side power sliding door release actuator’s drum and holder as a pair in the remote controller assembly with new ones. Kia will reimburse owners for repair expenses already incurred pursuant to Kia’s General Reimbursement Plan filed May 11, 2020. How Remedy Component Differs from Recalled Component : The remedy component has a plastic holder that is manufactured according to specification. Identify How/When Recall Condition was Corrected in Production : The injection mold for the plastic holder was corrected in production at the supplier on 9/2/21. Vehicles produced beginning on 10/27/21 were equipped with a remote controller assembly containing a corrected plastic holder. The remote controller assemblies potentially containing the out of specification plastic holders were installed in the subject vehicles produced from 7/28/21 through 10/26/21. All affected vehicles produced from 10/15/21 through 10/26/21 were held at the port and will be remedied before wholesale to dealer. This recall thus excludes vehicles produced from 10/15/21 through 10/26/21. Recall Schedule : Description of Recall Schedule : The Dealer Notification is scheduled to begin and end on December 9, 2021; and the Owner Notification will begin and end on December 16, 2021. Planned Dealer Notification Date : DEC 09, 2021 – DEC 09, 2021 Planned Owner Notification Date : DEC 16, 2021 – DEC 16, 2021 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END
This product presentation was made with AAWP plugin.





