“This site contains affiliate links for which OEMDTC may be compensated” |
August 27, 2020 NHTSA CAMPAIGN NUMBER: 20V519000
Hydraulic Electronic Control Unit May Short
If the HECU short circuits, there is an increased risk of an engine compartment fire.
NHTSA Campaign Number: 20V519
Manufacturer Kia Motors America
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 440,370
Summary
Kia Motors America (Kia) is recalling certain 2013-2015 Optima and 2014-2015 Sorento vehicles. Brake fluid may leak inside the Hydraulic Electronic Control Unit (HECU), possibly resulting in an electrical short.
Remedy
Kia will notify owners, and dealers will inspect the HECU for leaking brake fluid and replace the HECU if necessary, free of charge. Owners are advised to park outside and away from other vehicles and structures until the recall repair is completed. The recall began October 20, 2020. Owners may contact Kia customer service at 1-800-333-4542. Kia’s number for this recall is SC197.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Kia has a Recall
GROUP
Safety Recall Campaign |
MODEL | |
NUMBER
SC197 (Rev 2, 01/05/2021) |
DATE
October 2020 |
|
SAFETY RECALL CAMPAIGN | ||
HECU/ABS MODULE PARASITIC CURRENT DRAW TEST AND REPLACEMENT (SC197) |
NOTICE
This bulletin has been revised to include additional information. New/revised section of this bulletin are indicated by a black bar in the margin area.
This bulletin provides the procedure to inspect and, if necessary, replace the Hydraulic Electronic Control Unit (HECU) on some 2013-2015MY Optima (QF) vehicles produced from July 12, 2013 through October 2, 2015 and some 2014-2015MY Sorento (XMa) vehicles produced from June 17, 2013 through December 11, 2014. Brake fluid may leak internally inside the Hydraulic Electronic Control Unit (HECU) which, over time, can result in an electrical short. An electrical short in the HECU increases the risk of an engine compartment fire.
Dealers are to have technicians measure the Anti-Lock Brake System (ABS) circuit in the fuse box for parasitic current draw. If the current draw is >70uA, then the HECU assembly should be replaced due to possible internal damage caused by an internal fluid leak. Before conducting the procedure, verify that the vehicle is included in the list of affected VINs.
NOTICE
A Techline case number is required for all part orders to confirm the actual microamp draw is present at time of vehicle inspection prior to the part order.
NOTICE
There is no charge to the vehicle owner for this repair. Under applicable law, you may not sell or otherwise deliver any affected vehicle until it has been repaired pursuant to the procedures set forth in this bulletin.
NOTICE
To assure complete customer satisfaction, always remember to refer to WebDCS Warranty Coverage (validation) Inquiry Screen (Service → Warranty Coverage → Warranty Coverage Inquiry) for a list of any additional campaigns that may need to be performed on the vehicle before returning it to the customer.
Test Procedure:
IMPORTANT
This test procedure must be performed with the ignition ‘OFF’. (DO NOT ‘START’ the engine at any time during the test procedure.
- Use the SST Multimeter to measure the parasitic current draw only (Do not use for any other purposes). Ensure the SST has a good 9V battery installed.
- Parasitic draw must be measured for at least 15sec, in order to record a constant value.
Setting the SST Multimeter:
- Connect two (2) lead wires (red and black) to the SST.
Black Ground (-) lead wire; connect to COM Positive (+) lead wire; connect to VΩmA.
- Turn the selection knob to the right and set it to 200uA.
Reading Microamps:
Meter Setting | Displayed Value |
200uA | 0 – 200 |
2000uA | DO NOT USE |
10A | DO NOT USE |
Test Procedure:
1. Open the hood and disconnect the battery negative (-) terminal (A).
2. Remove the fuse box cover (B).
3. Locate the Multi-Fuse (C) ESC1 for (QF) Optima or ABS2 (XMa) Sorento 40A in the fuse box.
4. Loosen the 10mm Multi-Fuse retaining nut (D) and remove the Multi-Fuse.
Note: Optima (QF) ONLY, remove the nut cover first.
Sorento (XMA) ONLY, after removing the fuse, re-attach the 12VDC cable to the fuse box, and temporarily re-install the Multi-Fuse 10mm nut.
5. Re-connect the negative (-) battery
6a. Using the two (2) SST Multimeter jumper leads, carefully contact the ‘black’ lead to the ‘ESC1’ (QF) OR ‘ABS2’ (XMa) fuse terminal and the ‘red’ lead to the fuse box ‘Positive’ (E) post.
6b. Measure the Multimeter value/reading for at least 15 seconds. Note: The current draw value must stay constant. DO NOT damage the terminals.
If current draw value is OVER 70uA or 0.070mA, open a Techline case prior to part order, all part orders are on manual allocation. Replace the Hydraulic Electronic Control unit (HECU) by referring to the “Brake System → ESC (Electronic Stability Control) System → ESC Control Module → Repair procedures” chapter in the applicable Shop Manual on KGIS.
If current draw value is BELOW 70uA or .070mA, no further action is required. Reinstall the removed parts in the reverse order of removal.
NOTICE
All parts replaced are subject to return to the Warranty Parts Return Center (WPRC) for verification of the reported parasitic draw.
AFFECTED VEHICLE RANGE:
Model | Production Date Range |
Optima (QF) | July 12, 2013 to October 2, 2015 |
Sorento (XMa) | June 17, 2013 to December 11, 2014 |
REQUIRED TOOL:
Tool Name | Figure | Qty. | Comments |
Multimeter DT-830D | 1 | Only one (1) multimeter was auto shipped to each dealer by MPA, P/N: KQ589 4C100QQK.
Additional warrantable concerns will be handled by Snap-On Business Solutions*.
|
* Call Snap-on Business Solutions at (888) 542-1011 for lead replacements or defective meter.
REQUIRED PART:
Part Name | Part Number | Figure | Qty. |
HECU Assembly* (XMa) | 58920 1U000QQK | 1
*Techline case will be required prior to part order. |
|
HECU Assembly* (QF) | 58920 4C550QQK
58920 4C870QQK 58920 2T550QQK 58920 2T870QQK |
WARRANTY INFORMATION:
N Code: N99 C Code: C99
Model | Claim Type | Causal P/N | Qty. | Repair Description | Labor Op Code | Op Time | Replacement P/N | Qty. |
XMa | R | 58920
1U000 |
0 | (SC197)
HECU Inspection/Test |
201A18I0 | 0.3 M/H | N/A | 0 |
(SC197)
HECU Test and Replacement |
201A18R0 | 2.1 M/H | 58920 1U000QQK | 1 | ||||
QF | 58920
4C550 |
(SC197)
HECU Inspection/Test |
201A18I1 | 0.3 M/H | N/A | 0 | ||
(SC197)
HECU Test and Replacement |
201A18R1 | 2.0 M/H | 58920 4C550QQK* | 1 | ||||
58920 4C870QQK* | ||||||||
58920 2T550QQK* | ||||||||
58920 2T870QQK* |
*Note: Only one (1) applicable HECU Replacement P/N can be claimed for QF model. Refer to Warranty Bulletin 2020-24 for claim submission procedures. Use sublet code X1 for reimbursement for Kia Brake Fluid P/N: UM010 CH043, DOT 4 ($9 maximum).
Labor Op Codes have been revised due to audio presets and reprogramming is not required.
NOTICE
VIN inquiry data for this repair is provided for tracking purposes only. Kia retailers should reference SC197 when accessing the WebDCS system.
IMPORTANT SAFETY RECALL
(NHTSA Recall Number: 20V519)
This notice applies to your vehicle: (Insert VIN)
October 15, 2020
Kia has identified a defect in your vehicle that relates to motor vehicle safety
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety
Act. Kia Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2014-2015 MY Kia Sorento vehicles. The defect can result in a fire in your vehicle’s engine compartment. Our records indicate that you own or lease one of the potentially affected vehicles.
What Is The Problem?
The Hydraulic Electronic Control Unit (HECU) assembly controls the Anti-Lock Braking System (ABS), Electronic Stability Control System (ESC) and Traction Control System (TCS) in your vehicle. Brake fluid may leak internally inside the HECU, which, over time, can result in an electrical short. An electrical short in the HECU increases the risk of an engine compartment fire.
Kia Will Inspect the HECU And If A Leak Is Found, Kia Will Replace The HECU With A New One At No Cost for Parts Or Labor To You.
Kia has advised its authorized dealers to inspect the HECU for leaking brake fluid. If brake fluid is leaking, the HECU will be replaced with a new one at Kia’s expense at no cost to you. The actual time required to perform the repair will be approximately 1 to 2 hours. However, your vehicle may be needed longer. We recommend scheduling a service appointment to minimize inconvenience. Please contact your dealer for an exact estimate of how long they may need your vehicle for this repair.
What Should You Do?
- In the interest of the safety of your passengers, as well as your own safety, please immediately contact your Kia dealer to arrange for the recall repair to be conducted.
- Although Kia is unaware of any fire incidents occurring while the vehicle is turned off and parked, out of an abundance of caution, park your vehicle outdoors and away from any other vehicles or structures until you have the recall repair performed.
- To find your nearest dealer, visit kia.com and click the “Find Dealer” button in the upper right corner (“Dealers” on a mobile device). You can also use the QR code below with your mobile device to access this information (see the bottom of this letter for more information about QR code use):
What If You Have Already Paid To Have This Situation Corrected?
If you have incurred expense to remedy this issue prior to the date of this notice, you may have the opportunity to obtain reimbursement for that expense. You may submit your receipts online to Kia via the Owners section of www.kia.com or mail your receipts with a copy of the attached Request for Reimbursement form directly to Kia for review and consideration:
Consumer Assistance Center
Kia Motors America, Inc.
P.O. Box 52410
Irvine, CA 92619-2410
1-800-333-4542
Pursuant to the General Reimbursement Plan issued by Kia pursuant to Federal Regulation 49 CFR 573.13, Kia will use its best efforts to respond to your claim within sixty (60) days of receipt and at that time Kia may either accept or reject that claim or it may request more information to evaluate the claim.
Have You Changed Your Address Or Sold Your Kia?
If you have changed your home address, sold your Kia vehicle, or no longer own your vehicle, please complete
the attached prepaid “Change of Address/Ownership” card and mail it to us. You can also contact the Consumer Assistance Center phone number listed above.
What If You Are A Vehicle Lessor?
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
What If You Have Other Questions?
If your dealer does not respond to your service request in a timely manner, we suggest that you call Kia’s Consumer Assistance Center at 1-800-333-4542. This number has TTY capability. If you still are not satisfied that we have remedied this situation without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590; or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
This action has been taken in the interest of your safety, and we regret any inconvenience this situation may cause you.
Sincerely,
Consumer Affairs Department
QR Code Use:
- A QR Code is a square, 2-dimensional barcode that can be read by mobile devices loaded with an appropriate barcode or QR Code Reader App. The app reads the barcode image and then launches/uploads the specific information the code contains, such as URLs, text, photos, videos.
- With a mobile device, download a QR Code Reader App. With many devices, you can do this through an app store or marketplace.
- Open the QR Code Reader App on your mobile device. The app will utilize your device’s camera. Center the code in the camera viewing area. With some apps, the URL or other information will automatically load when the code is recognized. For others, you may have to snap or take a picture of the QR code. Refer to the QR Reader Code App instructions.
IMPORTANT SAFETY RECALL
(NHTSA Recall Number: 20V519)
This notice applies to your vehicle: (Insert VIN)
October 20, 2020
Kia has identified a defect in your vehicle that relates to motor vehicle safety
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety
Act. Kia Motors has decided that a defect, which relates to motor vehicle safety, exists in certain 2013-2015 MY Kia Optima vehicles. The defect can result in a fire in your vehicle’s engine compartment. Our records indicate that you own or lease one of the potentially affected vehicles.
What Is The Problem?
The Hydraulic Electronic Control Unit (HECU) assembly controls the Anti-Lock Braking System (ABS), Electronic Stability Control System (ESC) and Traction Control System (TCS) in your vehicle. Brake fluid may leak internally inside the HECU, which, over time, can result in an electrical short. An electrical short in the HECU increases the risk of an engine compartment fire.
Kia Will Inspect the HECU And If A Leak Is Found, Kia Will Replace The HECU With A New One At No Cost for Parts Or Labor To You.
Kia has advised its authorized dealers to inspect the HECU for leaking brake fluid. If brake fluid is leaking, the HECU will be replaced with a new one at Kia’s expense at no cost to you. The actual time required to perform the repair will be approximately 1 to 2 hours. However, your vehicle may be needed longer. We recommend scheduling a service appointment to minimize inconvenience. Please contact your dealer for an exact estimate of how long they may need your vehicle for this repair.
What Should You Do?
- In the interest of the safety of your passengers, as well as your own safety, please immediately contact your Kia dealer to arrange for the recall repair to be conducted.
- Although Kia is unaware of any fire incidents occurring while the vehicle is turned off and parked, out of an abundance of caution, park your vehicle outdoors and away from any other vehicles or structures until you have the recall repair performed.
- To find your nearest dealer, visit kia.com and click the “Find Dealer” button in the upper right corner (“Dealers” on a mobile device). You can also use the QR code below with your mobile device to access this information (see the bottom of this letter for more information about QR code use):
What If You Have Already Paid To Have This Situation Corrected?
If you have incurred expense to remedy this issue prior to the date of this notice, you may have the opportunity to obtain reimbursement for that expense. You may submit your receipts online to Kia via the Owners section of www.kia.com or mail your receipts with a copy of the attached Request for Reimbursement form directly to Kia for review and consideration:
Consumer Assistance Center
Kia Motors America, Inc.
P.O. Box 52410
Irvine, CA 92619-2410
1-800-333-4542
Pursuant to the General Reimbursement Plan issued by Kia pursuant to Federal Regulation 49 CFR 573.13, Kia will use its best efforts to respond to your claim within sixty (60) days of receipt and at that time Kia may either accept or reject that claim or it may request more information to evaluate the claim.
Have You Changed Your Address Or Sold Your Kia?
If you have changed your home address, sold your Kia vehicle, or no longer own your vehicle, please complete
the attached prepaid “Change of Address/Ownership” card and mail it to us. You can also contact the Consumer Assistance Center phone number listed above.
What If You Are A Vehicle Lessor?
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
What If You Have Other Questions?
If your dealer does not respond to your service request in a timely manner, we suggest that you call Kia’s Consumer Assistance Center at 1-800-333-4542. This number has TTY capability. If you still are not satisfied that we have remedied this situation without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590; or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
This action has been taken in the interest of your safety, and we regret any inconvenience this situation may cause you.
Sincerely,
Consumer Affairs Department
QR Code Use:
- A QR Code is a square, 2-dimensional barcode that can be read by mobile devices loaded with an appropriate barcode or QR Code Reader App. The app reads the barcode image and then launches/uploads the specific information the code contains, such as URLs, text, photos, videos.
- With a mobile device, download a QR Code Reader App. With many devices, you can do this through an app store or marketplace.
- Open the QR Code Reader App on your mobile device. The app will utilize your device’s camera. Center the code in the camera viewing area. With some apps, the URL or other information will automatically load when the code is recognized. For others, you may have to snap or take a picture of the QR code. Refer to the QR Reader Code App instructions.
SC197 – 2013-2015 MY OPTIMA AND 2014-2015 MY SORENTO HECU/ABS MODULE
SAFETY RECALL CAMPAIGN
Q & A
October 12, 2020
Q1. What type of campaign is Kia conducting?
Kia Motors America, Inc. is conducting a safety recall campaign on certain 2013-2015 MY Optima and 2014-2015 MY Sorento vehicles to inspect for leaking brake fluid and, if a leak is detected, replace the Hydraulic Electronic Control Unit (HECU).
Q2. What vehicles are affected by the recall?
Certain 2013-2015 MY Optima vehicles produced July 12, 2013 through October 2, 2015; and Certain 2014-2015 MY Sorento vehicles produced June 17, 2013 through December 11, 2014.
Q3. How many customer vehicles are affected by this recall?
Approximately 440,370 vehicles.
Q4. What is the concern with the Hydraulic Electronic Control Unit?
The Hydraulic Electronic Control Unit (HECU) assembly controls the Anti-Lock Braking System (ABS), Electronic Stability Control System (ESC) and Traction Control System (TCS) in your vehicle. Brake fluid may leak internally inside the HECU, which, over time, can result in an electrical short. An electrical short in the HECU increases the risk of an engine compartment fire.
Q5. Can you describe the recall campaign and fix?
Kia has advised its authorized dealers to inspect the HECU for leaking brake fluid. If brake fluid is leaking, the HECU will be replaced with a new one.
Q6. How was the issue discovered?
Through the regular monitoring of field information.
Q7. What should vehicle owners do when they receive the notification?
Owners should contact their Kia dealer to arrange for the repair to be performed. In addition, although Kia is unaware of any fire incidents occurring while the vehicle is turned off and parked, out of an abundance of caution, owners should park their vehicle outdoors and away from any other vehicles or structures until the recall repair is performed.
Q8. Will this cost vehicle owners any money?
No. The inspection and, if necessary, the replacement of the HECU assembly will be at no cost to the customer.
Q9. What about customers who may have already paid to have the Hydraulic Electronic Control Unit Assembly?
Owners who have incurred expense to remedy this issue prior to the date of this notice may have the opportunity to obtain reimbursement for that expense by submitting their receipts online to Kia via the Owners section of www.kia.com or mail the receipts with the enclosed Request for Reimbursement Form directly to Kia for review and consideration:
Consumer Assistance Center
Kia Motors America, Inc.
P.O. Box 52410
Irvine, CA 92619-2410
1-800-333-4542
Q10. How long will the repair take?
The estimated time required to complete the repair is approximately 1 to 2 hours. The actual time, however, can vary depending on the dealer’s work schedule. Therefore, scheduling an appointment is recommended.
Q11. How will owners of the affected vehicles be notified?
Kia will be notifying owners of the affected vehicles by first-class mail beginning on October 15, 2020.
Q12. Are there any restrictions on an owner’s eligibility?
No.
Q13. If a customer has an immediate question, where can they get further information?
The customer can contact their local Kia dealership or call Kia’s Consumer Assistance Center at 1800-333-4KIA (4542), Monday through Friday, 5 AM to 6 PM Pacific Standard Time, or via the internet @ www.kia.com (Owner’s Section).
2013-2015MY Optima & 2014-2015MY Sorento HECU Chronology
Basis of Safety Defect Determination 573.6(c)(6)
February 2020-May 2020
Kia Motors America, Inc. (KMA) receives electrical failure complaint for 2015 Kia Sorento on February 5, 2020. Dealer identifies Hydraulic Electric Control Unit (HECU) melted. KMA requests and subsequently receives engine wiring harness and HECU for evaluation on May 27, 2020 and identifies localized heat damage to HECU connector and circuit board near connector. KMA sends collected parts to Kia Motors Corporation (KMC) on May 28, 2020 and requests further evaluation.
June 2020
KMC and HECU supplier work together to evaluate collected HECU received from KMA. HECU found to be internally damaged and melted possibly due to leaking brake fluid. KMA receives information regarding two (2) incidents involving a 2015 Kia Optima where HECU connector appears melted. KMA begins process of recovering parts for further evaluation.
July 2020-August 20, 2020
KMA notified of an alleged fire involving the HECU of a 2015 Kia Sorento and two (2) incidents involving a 2013 Kia Optima. KMA reviews photos and identifies heat damage isolated to area of HECU. No actual vehicle fire. KMA begins process of recovering parts for further evaluation.
August 21, 2020
While KMA is still waiting for recovered parts, KMC informed by supplier of HECU that same HECU component supplied to another manufacturer has confirmed thermal damage.
August 25, 2020
KMC decides to conduct a recall of certain Kia Optima (QF) and Sorento (XMa) vehicles manufactured at Kia Motors Manufacturing Georgia (KMMG). Six (6) Optima and two (2) Sorento (XMa) alleged fire related customer complaints (i.e. isolated melting). No known crashes or injuries related to this condition.
5 Affected Products
Vehicles
MAKE | MODEL | YEAR |
KIA | OPTIMA | 2013-2015 |
KIA | SORENTO | 2014-2015 |
17 Associated Documents
Remedy Instructions and TSB
RCRIT-20V519-7083.pdf 911.124KB
Miscellaneous Document – SC197 – 2013-2015 MY OPTIMA AND 2014-2015 MY SORENTO HECU/ABS MODULE SAFETY RECALL CAMPAIGN Q & A
RMISC-20V519-1373.pdf 108.234KB
Manufacturer Notices(to Dealers,etc)- SC197 – Dealer Principal Memo
RCMN-20V519-5983.pdf 114.257KB
Manufacturer Notices(to Dealers,etc)- SC197 – Dealer Parts and Service Manager Memo
RCMN-20V519-0128.pdf 116.892KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V519-2899.PDF 211.263KB
ISSUED Owner Notification Letter(Part 577)- Sorento
RCONL-20V519-7451.pdf 184.195KB
Remedy Instructions and TSB
RCRIT-20V519-7884.pdf 743.407KB
ISSUED Owner Notification Letter(Part 577)- Optima
RCONL-20V519-6717.pdf 184.413KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20V519-7570.PDF 211.153KB
Remedy Instructions and TSB
RCRIT-20V519-7449.pdf 424.998KB
Remedy Instructions and TSB
RCRIT-20V519-2406.pdf 823.058KB
Recall Acknowledgement
RCAK-20V519-6289.pdf 244.901KB
Chronology
RMISC-20V519-1447.pdf 69.782KB
Defect Notice 573 Report
RCLRPT-20V519-6446.PDF 215.429KB
Miscellaneous Document – REQUEST FOR REIMBURSEMENT FORM SC197 – 2013-2015 MY OPTIMA – HECU SAFETY RECALL CAMPAIGN
RMISC-20V519-4429.pdf 99.771KB
Miscellaneous Document – REQUEST FOR REIMBURSEMENT FORM SC197 – 2014-2015 MY SORENTO – HECU SAFETY RECALL CAMPAIGN
RMISC-20V519-8788.pdf 99.636KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V519-8140.PDF 211.36KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V519&docType=RCL
1 Associated Investigation
Non-crash Vehicle Fires
NHTSA ID: PE19004
Dated opened: March 29, 2019
In a letter dated June 11, 2018, the Center for Auto Safety (CAS) petitioned the National Highway Traffic Safety Administration (NHTSA) to initiate a safety defect investigation into non-collision related fires on model year (MY) 2011-2014 Kia Optima and Sorento, and Hyundai Sonata and Santa Fe vehicles. In a letter dated July 24, 2018, CAS requested that MY 2010-2015 Kia Soul vehicles be added to the petition. CAS stated that there is a higher number of complaints to NHTSA regarding non-crash fires on these vehicles compared to other similar vehicles. The Office of Defects Investigation (ODI) had already opened a Recall Query (RQ17-003) on all Kia vehicles equipped with Theta II engines for engine failures that may cause stalling and fires. The query covers most of the petition subject Optima and Sorento vehicles but not any of the subject Soul vehicles.
On August 21, 2018, ODI opened a Defect Petition (DP18-003) to evaluate whether to grant or deny the CAS petition. ODI sent Information Request letters to Kia (September and October 2018) requesting information on all engine and non-engine related fires in the petition Kia vehicles. ODI performed extensive analysis on the information obtained from Kia. During the DP18-003 analysis, Kia initiated three additional safety recalls related to engine compartment fires on certain petitioned and non-petitioned vehicles (nearly 500,000 total vehicles: Recalls 18V-907, 19V-101, and 19V-120). Based on ODI’s review of the applicable materials, including responses to Information Requests sent to multiple manufacturers, Vehicle Owner Questionnaires (VOQ), and Early Warning Data, NHTSA has decided to grant the petition.
The petition is hereby granted. A Preliminary Evaluation has been opened to assess the scope, frequency, and potential safety-related consequences of alleged defects relating to non-collision vehicle fires in the 2011-2014 Kia Optima, 2011-2014 Kia Sorento, and 2010-2015 Kia Soul. While prior recalls of vehicles covered by this PE have primarily related to engine fires, NHTSA’s Preliminary Evaluation is not limited to engine components and may cover additional vehicle systems or components as well.
Attached is a list of the reference numbers for the 244 VOQs cited above.
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset and EPB service functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only., but not for Mac and ios system.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! It comes with h-igh-quality host with a strong box. Get LAUNCH CRP123 Elite car diagnostic scanner and give your lover a surprise!
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- 【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,fit for ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- 【Wifi Upgrade】- After you receive our products, for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
- 【Professional 6 System Diagnosis】- This OBD2 scanner has the most commonly system: ABS, SRS, Transmission, Engine, BCM and TPMS, which offers solution to pinpoint troubles of your cars.
- 【7 Most Useful Reset Services】- The car scanner can provides 7 hot maintenance reset: Oil EPB SAS ETS TPMS ABS DF. These powerful reset functions will make your car safer and more reliable.
- 【5" Large HD Touchscreen】- This car diagnostic scanner is equipped with a 5" color HD touchscreen: Compared with other screens, the displayed data and charts will be clearer.
- 【4 in 1 Live Data Display】- The car scanner tool shows live data of each control module by text or graphs, up to 4 parameters can be displayed at the same time. Test reports are easy to share and print.
- SIMPLIFYING CAR REPAIR - Our goal is to simplify your car repair process. Our device turns your smartphone into a powerful OBD2 scanner diagnostic tool, allowing you to quickly understand your vehicle's problem, view recommended fixes, and purchase the necessary parts for repair.
- EXPERIENCE PROFESSIONAL DIAGNOSTICS - BLCKTEC's enhanced vehicle diagnostics gives you access to advanced features typically found only on high-end scanners. With our car code reader you can read and clear engine codes, ABS (brakes), SRS (airbags), TPMS codes, and many more.
- RELIABLE AND ACCURATE RESULTS - Our car scanner utilizes the latest OBD2 technology to provide accurate and reliable diagnostic information, ensuring that you can trust the results you receive.
- COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Our bluetooth OBD2 scanner works with most vehicles made after 1996, including cars, trucks, and SUVs, making it a versatile tool for any DIYer.
- USER-FRIENDLY APP - Our accompanying app is easy to use and navigate, with clear and concise information displayed in an easy-to-understand format. Available on IOS and Android.
Last update on 2024-04-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START***************************************************************************************************************
*
*
*
*
*
***************************************************************************************************************
SC197
October 12, 2020
Attention: All Dealer Principals
Kia Motors America, Inc., pursuant to the National Traffic and Motor Vehicle Safety Act, is conducting a Safety Recall Campaign to inspect the Hydraulic Electronic Control Unit (HECU) for leaking brake fluid and, if a leak is detected, replace the HECU in the following vehicles:
• Certain 2013-2015 MY Optima vehicles produced from July 12, 2013 through October 2, 2015, and
• Certain 2014-2015 MY Sorento vehicles produced from June 17, 2013 through December 11, 2014.
The Hydraulic Electronic Control Unit (HECU) assembly controls the Anti-Lock Braking System (ABS), Electronic Stability Control System (ESC) and Traction Control System (TCS). Brake fluid may leak internally inside the HECU, which, over time, can result in an electrical short. An electrical short in the HECU increases the risk of an engine compartment fire. If an electrical short circuit occurs, the ESC warning light may illuminate.
The Technical Service Bulletin that provides vehicle inspection and repair procedures, affected VIN production range, and warranty claim information will be posted on the Kia Global Information System (KGIS) at www.kiatechinfo.com during the week of October 12, 2020.
Your Service Manager was sent a copy of the owner notification letter and a Q&A guide for recall questions both of which describe the issue and information on how to access the list of affected Optima and Sorento vehicles.
Kia will notify the vehicle owners starting on October 15, 2020.
NHTSA ADVISORY: It is a violation of Federal law for a dealer to deliver a new motor vehicle covered by this notification under a sale or lease until the defect is remedied.
Please make certain the appropriate personnel in your dealership are familiar with the details of this recall campaign to ensure proper responses to customer inquiries and requests to have the campaign performed on their 2013-2015 MY Optima and 2014-2015 MY Sorento vehicles.
LEGAL PRIVACY LIABILITY NOTICE: Pursuant to the terms of the Dealer Sales and Service Agreement and the Gramm-Leach-Bliley federal consumer privacy act, you are required to keep confidential any and all information and documents provided to you by Kia Motors America, Inc. or generated by you in the conduct of carrying out work under that Agreement regarding Kia vehicle purchasers and owners, including but not limited to warranty claim information. Kia dealers may use such owner information for the sole purpose of conducting and performing this safety recall campaign, and for no other purpose.
Your prompt attention in completing this recall campaign is appreciated. If you have any questions, please contact your Kia District Parts & Service Manager.
Sincerely,
Kia Service Department
Enclosures
*********************************************************************************************************
SC197
October 12, 2020
Attention: All Kia Parts & Service Managers
Kia Motors America, Inc., pursuant to the National Traffic and Motor Vehicle Safety Act, is conducting a Safety Recall Campaign to inspect the Hydraulic Electronic Control Unit (HECU) for leaking brake fluid and, if a leak is detected, replace the HECU in the following vehicles:
• Certain 2013-2015 MY Optima vehicles produced from July 12, 2013 through October 2, 2015, and
• Certain 2014-2015 MY Sorento vehicles produced from June 17, 2013 through December 11, 2014.
The Hydraulic Electronic Control Unit (HECU) assembly controls the Anti-Lock Braking System (ABS), Electronic Stability Control System (ESC) and Traction Control System (TCS). Brake fluid may leak internally inside the HECU, which, over time, can result in an electrical short. An electrical short in the HECU increases the risk of an engine compartment fire. If an electrical short circuit occurs, the ESC warning light may illuminate.
The Technical Service Bulletin that provides vehicle inspection and repair procedures, affected VIN production range, and warranty claim information will be posted on the Kia Global Information System (KGIS) at www.kiatechinfo.com during the week of October 12, 2020.
PARTS INFORMATION – As the need for the HECU Module is expected to be low, a valid VIN will be required for order entry.
Enclosed you will find a copy of the owner notification letter and a Q&A Guide for recall questions, both of which describe the issue. A list of Kia Optima and Sorento owners affected by this recall can be accessed on WEBDCS. Log onto the site, select the Campaigns Tab, click on Open Campaign Report in the left side menu, and select SC197 to generate the list.
We will mail notices to the affected 2013-2015 MY Optima and 2014-2015 MY Sorento vehicle owners beginning on October 15, 2020. Please start performing the repairs immediately on any affected vehicles currently in your inventory.
Also, please make certain the appropriate personnel in your dealership are familiar with the details of this recall to ensure proper responses to customer inquiries and requests to have the recall performed on their Optima and Sorento vehicles. This Safety Recall represents an opportunity for your service department to deliver an exceptional service experience (e.g. flexible service appointment process, car wash and vacuum and timely service).
NHTSA ADVISORY: It is a violation of Federal law for a dealer to deliver a new motor vehicle covered by this notification under a sale or lease until the defect is remedied.
LEGAL PRIVACY LIABILITY NOTICE: Pursuant to the terms of the Dealer Sales and Service Agreement and the Gramm-Leach-Bliley federal consumer privacy act, you are required to keep confidential any and all information and documents provided to you by Kia Motors America, Inc. or generated by you in the conduct of carrying out work under that Agreement regarding Kia vehicle purchasers and owners, including but not limited to warranty claim information. Kia dealers may use such owner information for the sole purpose of conducting and performing this safety recall campaign, and for no other purpose.
Your prompt attention in completing this recall is appreciated. If you have any questions, please contact your Kia District Parts and Service Manager.
Sincerely,
Kia Service Department
Enclosures
SEOCONTENT-END