SUBJECT:
PANORAMIC SUNROOF DUST SEAL REPLACEMENT
When diagnosing a panoramic sunroof assembly with torn dust seals, refer to the procedure below to replace ONLY the affected dust seals and NOT the panoramic sunroof assembly.
| Part No. | Description | QTY |
|---|---|---|
| KG310-1301 | Seal (RH), Sunroof Dust | 1 |
| KG310-1601 | Seal (LH), Sunroof Dust | 1 |
| No. | Description |
|---|---|
| 1. | Glass Panel |
| 2. | Rear Rail Cover Seal |
| 3. | Rear Rail |
| 4. | Dust Seal |
| 5. | Side Molding Panel |
| 6. | Sunroof Frame Assy. |
Service Procedure:
- Carefully remove the front and rear roof rack rail trim pieces.
- Remove the roof rack rail.
- Carefully remove the rear sunroof side molding panel.
- Remove the dust seal by pulling it up and towards the front of the
- Clean out any debris, if present, and lubricate the sunroof track using Silicone based grease (P/N UM011-CH052).
- Clean the mounting surface for the dust seal using Isopropyl Alcohol.
- Install the new dust seal.
- Re-install all removed components by reversing the order of removal.
