| “This site contains affiliate links for which OEMDTC may be compensated” |
SUBJECT:
COMBINED TSB/SERVICE ACTION: ECM UPGRADE – MIL ON WITH DTC P0461 (SA156)
This bulletin provides information related to an ECM software upgrade for 2014MY Forte (YD) vehicles with 2.0L GDI engine, produced from January 31, 2013 to September 26, 2013, which may experience a malfunction indicator lamp (MIL) illuminated with the Electronic Control Module (ECM) system-related DTC P0461. To prevent and/or correct this condition, the ECM should be reprogrammed using the GDS download, as described in this bulletin. Kia is requesting the completion of this Service Action on all affected vehicles, including dealer stock, prior to delivery. For confirmation that the latest reflash has been done to a vehicle you are working on, verify ROM ID using the tables in this TSB.
For vehicles not on the Affected Vehicles list, but with a customer concern as described above, perform the following procedure outlined in this bulletin and submit a warranty claim per “customer concern” (Standard TSB) claim information on page 7.
DTC – P0461: Fuel Level Sensor Circuit Range/Performance
To correct this condition, the ECM should be reprogrammed using the GDS download as described in this bulletin.
| UPGRADE EVENT NAME |
| 218.YD DTC(P0461) LOGIC IMPROVEMENT(ECU) |
ROM ID INFORMATION TABLES:
Upgrade event #218 (YD)
| MODEL | T/M | IMMO | ECM P/N | ROM ID | |
|---|---|---|---|---|---|
| PREVIOUS | NEW | ||||
| YD 2.0 14MY | A/T | Yes (+) | 39131-2EYB0
39131-2EYB2 |
GGYD-DNUAQS02C00
GGYD-DNUAQS03C00 GGYD-DNUAQS04C00 |
GGYD-DNUAQS06C00 |
| No (-) | 39133-2EYB0
39133-2EYB2 |
GGYD-DNUAPS02C00
GGYD-DNUAPS03C00 GGYD-DNUAPS04C00 |
GGYD-DNUAPS06C00 | ||
| M/T | Yes (+)
|
39135-2EYB0 | GGYD-DNUAFS02600
GGYD-DNUAFS03600 GGYD-DNUAFS04600 |
GGYD-DNUAFS06600 | |
| No (-) | 39137-2EYB0 | GGYD-DNUAES02600
GGYD-DNUAES03600 GGYD-DNUAES04600 |
GGYD-DNUAES06600 | ||
MANUAL MODE ECM UPGRADE PASSWORDS:
Do NOT perform Manual Mode ECM upgrade unless Auto Mode fails.
Upgrade event #218 Forte (YD)
| MY | MENU | PASSWORD |
|---|---|---|
| YD 2.0
14MY |
YD 2.0 GDI AT +IMMO/SMK : 39131-2EYB0/B2 | 3122 |
| YD 2.0 GDI AT -IMMO : 39133-2EYB0/B2 | 3322 | |
| YD 2.0 GDI MT +IMMO/SMK : 39135-2EYB0 | 3520 | |
| YD 2.0 GDI MT -IMMO : 39137-2EYB0 | 3720 |
AFFECTED VEHICLE PRODUCTION RANGE:
| Model | MY | Production Date Range |
|---|---|---|
| Forte (YD) | 2014 | From January 31, 2013 to September 26, 2013 |
Loading...
Reload document 
Open in new tab
What is J2534?
A single set of programming hardware consists of personal computer(PC), standard interface to a device driver and an interface hardware that connects between PC and a programmable ECU of vehicle.
The main purpose of this regulation is to program ECUs for all vehicles using a single set in the field.”
| Device | Manufacturers | API | DLL | Firmware |
|---|---|---|---|---|
CarDAQ Plus  |
Drew Technologies Inc. | 4.04 | 1.9.28 | 1.9.28 |
| ES6510 | Vetronix Corporation | 4.04 | 12.00 | 12.00 |
| Sun PassThru Pro | Snap-on Diagnostics | 4.04 | 02.07u | 02.07u |
| PassThru+ XS | I+ME Actia GmbH | 4.04 | 02.07u | 02.07u |
| OTTOTEST-VCI | OTTO | 4.04 | 1.04 | 1.34 |
| iFlash | Blue Streak | 4.04 | 1.04 | 1.34 |
| PASS THRU PRO II |
Snap-on Diagnostics | 4.04 | 1.9.24 | 1.9.24 |
| AEZ Flasher | AE Tools | 4.04 | 1.9.28 | 1.9.28 |
| VSI-2534 | Dearborn Tech | 4.04 | 2.05.26 | 2.05.26 |
| Flasher Pro | Bosch | 4.04 | 1.9.28 | 1.9.28 |
| Flash2 | Cardone | 4.04 | 2.06.28.2 | 2.06.28.2 |
| PX3 | Dearborn Tech | 4.04 | 1.00.09 | 1.00.09 |
| CARDAQ-M |
Drew Technologies Inc. | 4.04 | 1.0.106 | 1.0.106 |
| Universal Reprogrammer II | EASE Diagnostics | 4.04 | 1.9.28 | 1.9.28 |
| G-Scan2 | GIT | 4.04 | 3.1 | 9.03 |
* API, DLL and Firmware version may be controlled by the device manufacturer. Contact the manufacturer if you are unable to find the version listed above All devices were tested/verified on all Kia engine management systems.