| “This site contains affiliate links for which OEMDTC may be compensated” |
SUBJECT:
SERVICE ACTION: BLIND SPOT DETECTION (BSD) SYSTEM LOGIC IMPROVEMENT (SA187)
This bulletin provides information related to an upgrade of the logic for the Blind Spot Detection (BSD) System of some 2015MY Optima (QF) vehicles, produced from August 12, 2014 to November 19, 2014. The vehicles in question may have a “Check BSD System” message illuminated in the instrument cluster, along with DTC C2702:54 or C2703:54 stored in BSD system, as Active or Pending, during Fault Code Searching. To resolve this concern, the BSD System should be reprogrammed using the GDS download, as described in this bulletin. For confirmation that the latest reflash has been done to a vehicle you are working on, verify ROM ID using the tables in this TSB.
DTC C2702:54 – Control Module ‘Master’ Missing Calibration
DTC C2703:54 – Control Module ‘Slave’ Missing Calibration
| UPGRADE EVENT NAME |
|---|
| 250.QF BSD S/W LOGIC IMPROVEMENT |
ROM ID INFORMATION TABLES:
Upgrade event #250
| BSD ECU P/N | Rom ID | |
|---|---|---|
| Previous | New | |
| 95811 2T600 (LH, Slave) | TF32TF32
TF32TF33 TF33TF32 |
TF33TF33 |
| 95821 2T600 (RH, Master) | ||
To verify the vehicle is affected, be sure to check the Calibration Identification of the vehicle’s ECU ROM ID and reference the Information Table as necessary.
Upgrade event #250 (QF)
| Model | Menu | Password |
|---|---|---|
| Optima (QF) | QF BSD 95811/21-2T600 | 2600 |
AFFECTED VEHICLE PRODUCTION RANGE:
| Model | Production Date Range |
|---|---|
| Optima (QF) | From August 12, 2014 to November 19, 2014 |
Loading...
Reload document 
Open in new tab
What is J2534?
A single set of programming hardware consists of personal computer(PC), standard interface to a device driver and an interface hardware that connects between PC and a programmable ECU of vehicle.
The main purpose of this regulation is to program ECUs for all vehicles using a single set in the field.”
| Device | Manufacturers | API | DLL | Firmware |
|---|---|---|---|---|
CarDAQ Plus  |
Drew Technologies Inc. | 4.04 | 1.9.28 | 1.9.28 |
| ES6510 | Vetronix Corporation | 4.04 | 12.00 | 12.00 |
| Sun PassThru Pro | Snap-on Diagnostics | 4.04 | 02.07u | 02.07u |
| PassThru+ XS | I+ME Actia GmbH | 4.04 | 02.07u | 02.07u |
| OTTOTEST-VCI | OTTO | 4.04 | 1.04 | 1.34 |
| iFlash | Blue Streak | 4.04 | 1.04 | 1.34 |
| PASS THRU PRO II |
Snap-on Diagnostics | 4.04 | 1.9.24 | 1.9.24 |
| AEZ Flasher | AE Tools | 4.04 | 1.9.28 | 1.9.28 |
| VSI-2534 | Dearborn Tech | 4.04 | 2.05.26 | 2.05.26 |
| Flasher Pro | Bosch | 4.04 | 1.9.28 | 1.9.28 |
| Flash2 | Cardone | 4.04 | 2.06.28.2 | 2.06.28.2 |
| PX3 | Dearborn Tech | 4.04 | 1.00.09 | 1.00.09 |
| CARDAQ-M |
Drew Technologies Inc. | 4.04 | 1.0.106 | 1.0.106 |
| Universal Reprogrammer II | EASE Diagnostics | 4.04 | 1.9.28 | 1.9.28 |
| G-Scan2 | GIT | 4.04 | 3.1 | 9.03 |
* API, DLL and Firmware version may be controlled by the device manufacturer. Contact the manufacturer if you are unable to find the version listed above All devices were tested/verified on all Kia engine management systems.