TT007 TECH TIP: Vehicle Towed in – No start/No Crank Concern Symptom: Vehicle towed in presenting a “no start/no crank” concern. Repair: After checking all of the inputs needed to start the engine, check the starter solenoid snap-in connector for possible pin tension/damage concern. Check that the connector is firmly installed into the starter solenoid. This may … Read more
TT062 TECH TIP: System Setting DTC P0461A Symptom: System setting DTC P0461 Fuel Level Sensor “A” Circuit Range Performance. Repair: First, check the fuel sender connector to make sure it is fully seated. Then, check for backed out pins in connectors EM11, EC11, MF11 (see diagram). Also, inspect the PCM & Cluster connections. If OK, perform … Read more
PS320 SUBJECT: ROUGH IDLE AFTER COLD START ON 3.3L GDI ENGINE When addressing a customer complaint of rough idle, which occurs only on the first start of the day and last s for 30-45 seconds, check for the possibility of poor injector performance in a particular cylinder. This concern may feel like a … Read more
TT057 TECH TIP: Navigation System Displaying the Wrong Location Symptom: Customer complains that the location displayed on the map is different than the actual location (i.e. system shows location in a river, lake, etc.). Repair: Check for bent pins at connector FR11 (34-WHT) located in the left front A-pillar (click on images). [embeddoc url=”https://static.oemdtc.com/TSB/TT057.pdf”] … Read more
PS334 SUBJECT: WIND NOISE AFTER CROSS BAR INSTALLATION When diagnosing a concern related to wind noise coming from the roof area and the vehicle is equipped with the OE roof rack cross bars, check the roof rack cross bars to make sure they are installed correctly, using the diagram below. If the cross … Read more
