| “This site contains affiliate links for which OEMDTC may be compensated” |
SUBJECT:
AWD SYSTEM HYDRAULIC ACTUATOR REPLACEMENT
This bulletin provides the procedure for replacement of the hydraulic actuator of some All-Wheel Drive (AWD) equipped 2011~2016MY Sportage (SL) vehicles, produced from May 6, 2010 through February 19, 2013 and some AWD equipped 2011~2015MY Sorento (XMa) vehicles, produced from October 24, 2009 through December 11, 2014, which may exhibit an inoperative AWD system with the Malfunction Indicator Lamp (MIL) on and DTCs P1820/1821/1822/1823/1824 (Active or in History). To correct this concern, replace the affected hydraulic actuator by referring to the applicable service procedure on KGIS. NOTE: Do NOT replace the coupling assembly for these concerns. Unnecessary assembly replacement may result in chargebacks.
- P1820 Pump for 4WD Motor High overcurrent detected
- P1821 Pump for 4WD Motor Wire Short to Battery
- P1822 Pump for 4WD Motor Wire Open Load
- P1823 Pump for 4WD Motor Wire Short to Ground
- P1824 Pump for 4WD Slow Thermal Overload
REQUIRED PARTS:
| Model | Applicable Date | Part Number | Comments |
|---|---|---|---|
| XMa | From October 24, 2009 ~ December 11, 2014 | 47810 3B520 | Hydraulic Actuator |
| SL | From May 6, 2010 through February 19, 2013 | 47810 3B520 (Actuator)
47891 3B310 (Harness) | Hydraulic Actuator and Actuator Harness |
| From February 20, 2013 ~ | 47810 3B520 | Hydraulic Actuator |
AFFECTED VEHICLE RANGE:
| Model | Production Date Range |
|---|---|
| Sorento (XMa) | From October 24, 2009 ~ December 11, 2014 |
| Sportage (SL) | From May 6, 2010 through February 19, 2013 and From February 20, 2013 ~ |
Loading...
Reload document 
Open in new tab
